Lubricant and Base Oil----Type I,II Base Oils

  Product: Type I,II Base Oils

  Brief introduction of the product: It is used to prepare aluminium plate rolling oil, gold foil rolling oil, aluminum foil rolling oil etc.

  Typical Data:

Item
Typical Data
Standard Test Method
Type I Base Oil I
Type II Base Oil  11
Appearance
Colorless and Odorless
Colorless and Odorless
Visual Inspection
Density (20℃),kg/m3
GB/Tl884-92
Distillation Range Initial Boiling point,℃           no lower than
200
232
GB/T6536-97
Dry point,℃
235
280
Flash point,℃            no lower than
40
67
GB/T261-83(91)
Real Colloid,mg/lOOml       no larger than
5
5
GB/T509-88(97)
Freezing point,℃         no higher than
-30
-30
GB/T2430-81(97)
Aromatic hydrocarbons,%(m/m)                  no larger than
0.l
0.l
by ultraviolet spectrum
Aniline point,℃
report
78
GB/T262-88(97)
Bromine value,gBr/100g       no larger than
l.0
GB/T11135-89
Sulfur Content, no larger than,%(m/m)
0.0005
0.0005
SH/T0253-92
Soluble Acids and Bases
None
GB/T259-88(97)
Mechanical Impurity, Water
None
See Note

 

Lubricant and Base Oil----No.2 Rolling Oil

·Recommended Applications:
This product is suitable to be used in the PM-20BP,PB-20FP ball pen makers which are imported in the pen industry. It may also be used for 20-roller cold rolling mills with a rolling speed about 2.5m/s to roll 1-0.03mm fine alloys, stainless steel and double alloys etc. It may replace Mobil424 cutting oil, America's Cook'S4856 or Koolubric22 cutting oil.

Property Characteristics: good extra-tension and lubricity, some corrosion resistance

·Typical Data:
     Appearance: deep yellow apparent liquid
     Kinematic viscosity( 40℃ )mm2/s:20-22 ( 40℃ )mm2/s:20-22 、
      Flash point ℃:160
     Solidifying point ℃:-8
     Max PB (N):785

·Product Package:170kg iron barrel

 
 
Refinery of Sinopec Jinling Petrochemical Corp.,Ltd.,All Rights Reserved  Http://www.njlyc.com
Add:Qixiashan, Nanjing, Jiangsu, China E-mail:webmaster@njlyc.com
Zip Code:210033 Tel:+86-25-58980604 Fax:+86-25-58981432